Date: Mon, 20 Sep 93 09:07:21 EST From: Dwight McKay (The Moderator) Reply-To: Suns-at-Home@harbor.ecn.purdue.edu Subject: Suns-at-Home Digest V6 #29 To: Suns-at-Home-List Suns-at-Home Digest Mon, 20 Sep 93 Volume 6 : Issue 29 Today's Topics: SaH V6 #28 (DIP switch for BNC/AUI? --ed) +--------------------------------------------------------------------+ | Submissions: suns-at-home \ @harbor.ecn.purdue.edu | | Requests: suns-at-home-request > -- or -- | | Archives: suns-at-home-archives / ...rutgers!pur-ee!... | +--------------------------------------------------------------------+ ---------------------------------------------------------------------- Date: Thu, 16 Sep 1993 16:31:43 -0400 From: db@diana.ocunix.on.ca (Dyane Bruce) Subject: Suns-at-Home Digest V6 #28 To: Suns-at-Home@ecn.purdue.edu I have a Sun 3/60 that I suspect is configured to use the AUI connector not the BNC connector (thinnet) for ethernet. Another person in town who has a SUN 3/60 told me there was a set of 8 jumpers within 5 inch radius of the BNC connector... I have pulled the motherboard out several times looking in vain for this jumper block to switch it from AUI to BNC. I lent out my EEPROM manual and haven't gotten it back. :-( It seems to me there was a way to reconfigure later SUN 3/60's using software only.. Or am I confusing a SPARC reference manual with the SUN 3/60? Can anybody help? -- Dyane Bruce db@diana.ocunix.on.ca 29 Vanson Ave. Nepean On, K2E 6A9 So who first started the tradition of 613-225-9920 putting witty sayings in sigs anyway? ------------------------------ End of Suns-at-Home Digest ******************************